Six key points of UPS battery detection - SCU

Six key points of UPS battery detection

UPS can realize uninterrupted power supply because of the battery. When the power supply is abnormal, the inverter can directly convert the chemical energy of the battery into AC energy and send it out, and use the electrical equipment to operate continuously.

  • Compatibility

The UPS battery online monitoring and management system has electromagnetic compatibility considerations in circuit design and structural design. The use of metal shell has a good shielding effect, and the system has no electromagnetic interference to the outside world.

  • Flame retardancy

The UPS battery online monitoring management system uses flame-retardant components and failures caused by short-circuit and overcurrent of the system will not cause open flames.

  • Fault tolerance

Each detection channel uses high impedance input mode, the current of detection circuit is less than microampere level, which will not affect the battery. Using the design of low-power components, the power consumption of the system is low, and the requirements of the user power supply system are not high.

  • Explosion proof

The on-line monitoring and management system of UPS battery uses electronic relay, which can switch sparks without channel and contact connecting equipment without open fire. It can also be used in petrochemical operation with high explosion-proof demand.

  • Interference

UPS battery on-line monitoring and management system uses power conversion technology, which has a wide range of operating voltage and strong ability to prevent over-current and over-voltage. The system is also designed with anti surge circuit, which can operate normally in high frequency and strong magnetic field environment.

  • Maintainability

UPS battery online monitoring management system uses modular design, online maintenance is strong, online maintenance will not affect the normal operation of the user system. UPS battery should be able to output large current at the moment of start-up and discharge, and also meet certain capacity requirements to ensure the inverter power supply time.

    Interested products

    Contact Us

    Contact SCU sales Team

    SCU international Sales Center


    Email: enquiry@scupower.com

    Tel: 86-311-85903762

    Fax: 86-311-85903718

    SCU's website uses cookies. By staying here you are agreeing to our use of cookies.

    Learn more I AGREE